Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 17.001 SLD 3
SOLID, SIMPLE AND AFFORDABLE
- Additional applications with Single Link Plus
- Higher payloads due to intelligent lightweight design
- Maximum reliability due to PALTRONIC
- High degree of user-friendliness thanks to optional radio remote control
Max. lifting moment | 16.8 |
Max. lifting capacity | 6200 |
Max. hydraulic outreach | 14.8 |
Max. manual outreach | 19.0 |
Slewing angle | 420° |
Slewing torque | 2.0 |
Stabilizer spread (std) | 5.0 m |
Fitting space required (std) | 0.83 |
Width folded | 2.55 |
Max. operating pressure | 330 |
Pump capacity | 40 - 60 l/min |
Dead weight (std.) | 1670 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment | Outreach | Slewing angle | Slewing torque (mt) | Pressure | Pump capacity (l/min) | Crane Weight | Crane Height | Crane Width | Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Std | 16.8 mt | 6.1 m | 420 | 2.0 | 33.0 Mpa | 40-60 | 1670 kg | 2250 mm | 2550 mm | 825 mm | 6000 mm | - | 2800 kg |
A | 16.3 mt | 8.2 m | 420 | 2.0 | 33.0 Mpa | 40-60 | 1825 kg | 2250 mm | 2550 mm | 825 mm | 8000 mm | - | 1960 kg |
B | 15.9 mt | 10.4 m | 420 | 2.0 | 33.0 Mpa | 40-60 | 1960 kg | 2250 mm | 2550 mm | 825 mm | 10300 mm | - | 1420 kg |
C | 15.6 mt | 12.6 m | 420 | 2.0 | 33.0 Mpa | 40-60 | 2075 kg | 2250 mm | 2550 mm | 895 mm | 12500 mm | - | 1080 kg |
D | 15.3 mt | 14.8 m | 420 | 2.0 | 33.0 Mpa | 40-60 | 2175 kg | 2250 mm | 2550 mm | 895 mm | 14700 mm | - | 830 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.